D-2 Plates to 12” thick, bars to 24” in diameter  
  A-2 Plates to 10” thick, bars to 24” in diameter  
  O-1 Plates to 4” thick, bars to 14” in diameter  
  H-13 Plates to 4” thick, bars to 14” in diameter  
  S-7 Plates to 4” thick, bars to 14” in diameter  
  S-5 Bars to 5” in diameter  
 
 
  4130 Modified HT plates to 10” thick  
  4140 Annealed and HTSR plates to 10” thick,
bars to 26” in diameter		  
  4140 T&G Sizes 1“ to 3-15/16”  
  4145 HTSR bars to 12.1” in diameter  
  4145 HMOD API7 Spec. Available to 31’ lengths  
  4150 Brake Die sizes from 1“ to 3” thick  
  4340 Annealed and HTSR bars to 26” in diameter  
  4320 Annealed bars to 6-1/2” in diameter  
  8620 As Rolled and Normalized bars to 20” in diameter  
  EN30B Available in sizes 2-1/2” to 6-3/4” in diameter  
  1018 Cold Drawn to 4-1/2” in diameter  
  1018/1020 Hot Rolled to 11” in diameter  
  1040 Hot Rolled to 10.1” in diameter  
  1045 As Rolled and Normalized bars to 26” in diameter  
  1045 T&G Sizes to 5”, metric sizes to 80mm  
  3312 Annealed bars to 6” in diameter  
  VS176 European Spec., carburizing grade - 17CrNiMo6  
  A105/A350LF2 ASTM A105 / ASTM A350 LF2 Dual Certified  
       
 
 
  Vancast 65-45-12 Ductile Cast Iron 2” to 16”  
  Vancast 954 Bronze 1” to 9” (C95400)  
  Vancast 660 Bronze 1” to 13” (C93200)
  
       
 
 
  Microhoned Tubing ASTM A519 Grade 1026

SC - Chrome Only - 1045 Cold Finished
1/2” to 5” in diameter

SCI - Induction Hardened Chrome Finish - 1045 Cold Finished
1/2” to 5” in diameter, 20mm to 110mm in diameter

VPC - Vanguard Pre-Cut
Inventory cut from rough machined plate 1-1/2” Square to 12” Square

VRM - Vanguard Red-D-Made
Inventoried sizes from ground top and bottom plate from 1/4” to 4” thick

Large inventories of precision flat ground stock and drill rod, standard and oversize tollerances (O-1, A-2, D-2, W-1)

  
       
       
 
*** Stock may vary from Branch to Branch ***
  
 

We welcome your feedback. Questions? Click here.
Copyright © 2005, Vanguard Steel Ltd.
All rights reserved